Publications

publications de Bonnardot Cédric

publications de Boudeau Nathalie

2019 (1)

  • article - Impact of strain rate sensitivity on the identification of the material parameters scattering and on the formability of zinc sheet
    International Journal of Material Forming (feb 2019, Pages pp 16)
    Milesi, Marc | Lecoq, Jean | Pradille, Christophe | Vitu, Ludovic | Boudeau, Nathalie | Bouchard, Pierre-Olivier
    doi | bibtex

2018 (4)

  • article - Evaluation of models for tube material characterization with the tube bulging test in an industrial setting
    International Journal of Material Forming (Volume 11, Issue (5), sep 2018, Pages :671 - 686)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    pdf | doi | bibtex
  • inproceedings - Flange bulging test of zinc alloy : comparison of analyses with analytical models and with stereo-correlation technique
    17th International Conference on Metal Forming (Metal Forming 2018) / Toyohashi, Japan (2018, Pages pages 8)
    Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Boudeau, Nathalie | Milesi, Marc | Manov, Stephan
    doi | bibtex
  • inproceedings - How to post-process experimental results from the flange bulging test ? Application to the characterization of a Zinc alloy
    International Deep-Drawing Research Group 2018 (IDDRG 2018) / Waterloo, Ontario, Canada (Volume 418, Issue 1, 2018, Pages pages 9)
    Boudeau, Nathalie | Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Michel, Gérard | Milesi, Marc | Manov, Stephan
    doi | bibtex
  • inproceedings - Characterization of zinc alloy by sheet bulging test with analytical models and digital image correlation
    21st International ESAFORM Conference on Material Forming (ESAFORM 2018) / Palermo, Italy (Volume 1960, Issue 1, 2018, Pages pages 7)
    Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Boudeau, Nathalie | Manov, Stephan | Milesi, Marc
    doi | bibtex

2017 (2)

  • article - On the tube hydroforming process using rectangular, trapezoidal, and trapezoid-sectional dies : modeling and experiments
    International Journal of Advanced Manufacturing Technology (Volume 93, Issue (5-8), nov 2017, Pages :1725 - 1735)
    Abdelkefi, Abir | Malecot, Pierrick | Boudeau, Nathalie | Guermazi, Noamen | Haddar, Nader
    pdf | doi | bibtex
  • article - Evaluation of the friction coefficient in tube hydroforming with the “corner filling test” in a square section die
    International Journal of Advanced Manufacturing Technology (Volume 88, Issue (5), feb 2017, Pages :2265 - 2273)
    Abdelkefi, Abir | Malecot, Pierrick | Boudeau, Nathalie | Guermazi, Noamen | Haddar, Nader
    doi | bibtex

2016 (1)

  • article - Effect of the lubrication between the tube and the die on the corner filling when hydroforming of different cross-sectional shapes
    International Journal of Advanced Manufacturing Technology (Volume 87, Issue (1), oct 2016, Pages :1169 - 1181)
    Abdelkefi, Abir | Guermazi, Noamen | Boudeau, Nathalie | Malecot, Pierrick | Haddar, Nader
    doi | bibtex

2015 (7)

  • inproceedings - Comparison of three analytical models for post-processing the tube bulging test
    International Conference on Advances in Materials & Processing Technologies (AMPT 2015) / Madrid, Spain (2015)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick
    bibtex
  • inproceedings - Comparaison de trois modèles pour le post-traitement de mesures issues du test de gonflement libre de tubes
    22ème Congrès Français de Mécanique (CFM 2015) / Lyon, France (2015, Pages pages 11 p)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    bibtex
  • article - Study of localized thinning of copper tube hydroforming in square section die : effect of friction conditions
    Key Engineering Materials (Volume 651 - 653, jul 2015, Pages :65 - 70)
    Abdelkefi, Abir | Guermazi, Noamen | Malecot, Pierrick | Boudeau, Nathalie | Michel, Gérard
    doi | bibtex
  • inproceedings - Post-processing of experimental results from tube bulging test to obtain hardening curve
    23ème Séminaire Franco-Polonais de Mécanique / Besançon, France (2015, Pages pages 1 p)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    bibtex
  • inproceedings - Post-processiing the tube bulging test : comparison of three analytical models
    19th ESAFORM Conference on Material Forming / Nantes, France (2015)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard
    bibtex
  • article - On the friction effect on the characteristics of hydroformed tube in a square section die : analytical, numerical and experimental approaches
    Key Engineering Materials (Volume 639, mar 2015, Pages :83 - 90)
    Abdelkefi, Abir | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Guermazi, Noamen
    doi | bibtex
  • incollection - Numerical study of localized necking in the strain path of copper hydroformed tube : effect of friction
    Design and Modeling of Mechanical Systems - II (Editor : Springer, Volume 789, mar 2015, Pages 275 - 284)
    Abdelkefi, Abir | Guermazi, Noamen | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard
    bibtex

2014 (1)

  • inproceedings - Mechanical characterization of stainless steel tubes thanks to a tube bulging test - Validation of analytical models
    ESTAD 2014 (2014, Pages pages 2 p)
    Butéri, Aurélien | Boudeau, Nathalie | Kress, Jérémy | Malecot, Pierrick | Michel, Gérard
    pdf | bibtex

2012 (2)

  • article - A simplified analytical model for post-processing experimental results from tube bulging test: theory, experimentations, simulations.
    International Journal of Mechanical Sciences (Volume 65, Issue (1), dec 2012, Pages :1 - 11)
    Boudeau, Nathalie | Malecot, Pierrick
    pdf | doi | bibtex
  • article - Composite based on polyetheretherketone reinforced with carbon fibres, an alternative to conventional materials for femoral implant: manufacturing process and resulting structural behaviour
    Materials and Design (Volume 40, sep 2012, Pages :148 - 156)
    Boudeau, Nathalie | Liksonov, D. | Barriere, Thierry | Maslov, L. | Gelin, Jean-Claude
    pdf | doi | bibtex

2011 (2)

  • article - Error evaluation on experimental stress-strain curve obtained from tube bulging test
    Thin-Walled Structures (Volume 49, Issue (10), oct 2011, Pages :1217 - 1224)
    Ben Ouirane, Abdel Hakim | Boudeau, Nathalie | Velasco, Raphaël | Michel, Gérard
    pdf | doi | bibtex
  • inproceedings - Développement du procédé de micro hydroformage de tubes
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie | Malecot, Pierrick
    pdf | bibtex

2010 (4)

  • inproceedings - Miniaturization of the tube bulging test
    International Conference on Advances in Materials and Processing Technologies (AMPT 2010) (2010, Pages pages 1285 - 1290)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie
    pdf | bibtex
  • article - Error evaluation on experimental stress-strain curve obtained from tube bulging test
    International Journal of Material Forming (Volume 3, Issue (S1), jun 2010, Pages :195 - 198)
    Ben Ouirane, Abdel Hakim | Velasco, Raphaël | Michel, Gérard | Boudeau, Nathalie
    pdf | doi | bibtex
  • inproceedings - Tube bulging test : evaluation of errors on material characterization
    IDDRG 2010 (2010)
    Boudeau, Nathalie | Ben Ouirane, Abdel Hakim | Michel, Gérard
    pdf | bibtex
  • inproceedings - Numerical investigations in microhydroforming and design of an experimental set-up for material characterization of micro tubes
    Proceedings of the International Deep Drawing Group Conference (IDDRG-2010), May 31-June 02, 2010, Graz, Austria (2010)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie
    pdf | bibtex

publications de Hapsari Gemala

2017 (3)

  • inproceedings - A procedure for ductile damage parameters identification by micro incremental sheet forming
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    bibtex
  • inproceedings - Numerical prediction of the forming limit diagrams for characterizing the thin sheet formability
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Hapsari, Gemala | Malecot, Pierrick
    bibtex
  • article - Instrumented incremental sheet testing for material behavior extraction under very large strain : information richness of continuous force measurement
    Materials and Design ( 2017)
    Hapsari, Gemala | Richard, Fabrice | Ben Hmida, Ramzi | Malecot, Pierrick | Thibaud, Sébastien
    pdf | doi | bibtex

2016 (2)

  • inproceedings - Numerical determination of the forming limit diagram for thin sheet metal foil from a ductile damage model identified via Micro-Single Point Incremental Forming tests
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016, Pages pages 3 p)
    Ben Hmida, Ramzi | Hapsari, Gemala | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Hardening law identification by micro incremental sheet forming : a sensitivity study
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex

publications de Lefebvre Quentin

publications de Malecot Pierrick

2020 (2)

  • article - Influence of manufacturing parameters on the mechanical properties of projection stereolithography-manufactured specimens
    International Journal of Advanced Manufacturing Technology (Volume 106, Issue (5), jan 2020, Pages :265 - 277)
    Ambrosio, Danilo | Gabrion, Xavier | Malecot, Pierrick | Amiot, Fabien | Thibaud, Sébastien
    pdf | doi | bibtex
  • article - Towards hemp fabrics for high-performance composites : Influence of weave pattern and features
    Composites Part B: Engineering (Volume 181, jan 2020, Pages :107582 (10))
    Corbin, Anne-Clémence | Soulat, Damien | Ferreira, Manuela | Labanieh, Ahmad-Rashed | Gabrion, Xavier | Malecot, Pierrick | Placet, Vincent
    pdf | doi | bibtex

2018 (4)

  • article - Evaluation of models for tube material characterization with the tube bulging test in an industrial setting
    International Journal of Material Forming (Volume 11, Issue (5), sep 2018, Pages :671 - 686)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    pdf | doi | bibtex
  • inproceedings - Flange bulging test of zinc alloy : comparison of analyses with analytical models and with stereo-correlation technique
    17th International Conference on Metal Forming (Metal Forming 2018) / Toyohashi, Japan (2018, Pages pages 8)
    Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Boudeau, Nathalie | Milesi, Marc | Manov, Stephan
    doi | bibtex
  • inproceedings - How to post-process experimental results from the flange bulging test ? Application to the characterization of a Zinc alloy
    International Deep-Drawing Research Group 2018 (IDDRG 2018) / Waterloo, Ontario, Canada (Volume 418, Issue 1, 2018, Pages pages 9)
    Boudeau, Nathalie | Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Michel, Gérard | Milesi, Marc | Manov, Stephan
    doi | bibtex
  • inproceedings - Characterization of zinc alloy by sheet bulging test with analytical models and digital image correlation
    21st International ESAFORM Conference on Material Forming (ESAFORM 2018) / Palermo, Italy (Volume 1960, Issue 1, 2018, Pages pages 7)
    Vitu, Ludovic | Laforge, Nicolas | Malecot, Pierrick | Boudeau, Nathalie | Manov, Stephan | Milesi, Marc
    doi | bibtex

2017 (5)

  • article - On the tube hydroforming process using rectangular, trapezoidal, and trapezoid-sectional dies : modeling and experiments
    International Journal of Advanced Manufacturing Technology (Volume 93, Issue (5-8), nov 2017, Pages :1725 - 1735)
    Abdelkefi, Abir | Malecot, Pierrick | Boudeau, Nathalie | Guermazi, Noamen | Haddar, Nader
    pdf | doi | bibtex
  • inproceedings - Numerical prediction of the forming limit diagrams for characterizing the thin sheet formability
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Hapsari, Gemala | Malecot, Pierrick
    bibtex
  • inproceedings - A procedure for ductile damage parameters identification by micro incremental sheet forming
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    bibtex
  • article - Evaluation of the friction coefficient in tube hydroforming with the “corner filling test” in a square section die
    International Journal of Advanced Manufacturing Technology (Volume 88, Issue (5), feb 2017, Pages :2265 - 2273)
    Abdelkefi, Abir | Malecot, Pierrick | Boudeau, Nathalie | Guermazi, Noamen | Haddar, Nader
    doi | bibtex
  • article - Instrumented incremental sheet testing for material behavior extraction under very large strain : information richness of continuous force measurement
    Materials and Design ( 2017)
    Hapsari, Gemala | Richard, Fabrice | Ben Hmida, Ramzi | Malecot, Pierrick | Thibaud, Sébastien
    pdf | doi | bibtex

2016 (3)

  • article - Effect of the lubrication between the tube and the die on the corner filling when hydroforming of different cross-sectional shapes
    International Journal of Advanced Manufacturing Technology (Volume 87, Issue (1), oct 2016, Pages :1169 - 1181)
    Abdelkefi, Abir | Guermazi, Noamen | Boudeau, Nathalie | Malecot, Pierrick | Haddar, Nader
    doi | bibtex
  • inproceedings - Numerical determination of the forming limit diagram for thin sheet metal foil from a ductile damage model identified via Micro-Single Point Incremental Forming tests
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016, Pages pages 3 p)
    Ben Hmida, Ramzi | Hapsari, Gemala | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Hardening law identification by micro incremental sheet forming : a sensitivity study
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex

2015 (8)

  • inproceedings - Comparison of three analytical models for post-processing the tube bulging test
    International Conference on Advances in Materials & Processing Technologies (AMPT 2015) / Madrid, Spain (2015)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick
    bibtex
  • inproceedings - Comparaison de trois modèles pour le post-traitement de mesures issues du test de gonflement libre de tubes
    22ème Congrès Français de Mécanique (CFM 2015) / Lyon, France (2015, Pages pages 11 p)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    bibtex
  • article - Study of localized thinning of copper tube hydroforming in square section die : effect of friction conditions
    Key Engineering Materials (Volume 651 - 653, jul 2015, Pages :65 - 70)
    Abdelkefi, Abir | Guermazi, Noamen | Malecot, Pierrick | Boudeau, Nathalie | Michel, Gérard
    doi | bibtex
  • inproceedings - Post-processing of experimental results from tube bulging test to obtain hardening curve
    23ème Séminaire Franco-Polonais de Mécanique / Besançon, France (2015, Pages pages 1 p)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Butéri, Aurélien
    bibtex
  • inproceedings - Post-processiing the tube bulging test : comparison of three analytical models
    19th ESAFORM Conference on Material Forming / Nantes, France (2015)
    Vitu, Ludovic | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard
    bibtex
  • article - On the friction effect on the characteristics of hydroformed tube in a square section die : analytical, numerical and experimental approaches
    Key Engineering Materials (Volume 639, mar 2015, Pages :83 - 90)
    Abdelkefi, Abir | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard | Guermazi, Noamen
    doi | bibtex
  • incollection - Numerical study of localized necking in the strain path of copper hydroformed tube : effect of friction
    Design and Modeling of Mechanical Systems - II (Editor : Springer, Volume 789, mar 2015, Pages 275 - 284)
    Abdelkefi, Abir | Guermazi, Noamen | Boudeau, Nathalie | Malecot, Pierrick | Michel, Gérard
    bibtex
  • inproceedings - Elastic-plastic damage behavior identification in micro scale length from instrumented micro-single point incremental forming
    International Conference on Micromanufacturing 4M/ICOMM 2015 (2015, Pages pages 230 - 233)
    Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    doi | bibtex

2014 (2)

  • inproceedings - 3D finite element simulation study of micro single point incremental forming
    International Conference on COmputational methods in Manufacturing Processes (ICOMP'14) (2014)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Mechanical characterization of stainless steel tubes thanks to a tube bulging test - Validation of analytical models
    ESTAD 2014 (2014, Pages pages 2 p)
    Butéri, Aurélien | Boudeau, Nathalie | Kress, Jérémy | Malecot, Pierrick | Michel, Gérard
    pdf | bibtex

2013 (3)

  • inproceedings - Modélisation numérique de l'endommagement en formage incrémental des tôles en faibles épaisseurs : procédures d'identification et validation
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Influence de la taille de grain initiale sur le procédé de formage incrémental des tôles en faibles épaisseurs
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Simulation et validation expérimentale de procédé de formage incrémental mono-point des tôles en faibles épaisseurs
    International Congress Design and Modelling of Mechanical Systems (CMSM 2013) (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    bibtex

2012 (2)

  • article - A simplified analytical model for post-processing experimental results from tube bulging test: theory, experimentations, simulations.
    International Journal of Mechanical Sciences (Volume 65, Issue (1), dec 2012, Pages :1 - 11)
    Boudeau, Nathalie | Malecot, Pierrick
    pdf | doi | bibtex
  • article - A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation
    Simulation Modelling Practice and Theory (Volume 29, dec 2012, Pages :32 – 43)
    Thibaud, Sébastien | Ben Hmida, Ramzi | Richard, Fabrice | Malecot, Pierrick
    pdf | doi | bibtex

2011 (1)

  • inproceedings - Développement du procédé de micro hydroformage de tubes
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie | Malecot, Pierrick
    pdf | bibtex

publications de Picart Philippe

2016 (1)

  • article - Characterization and thermo – elasto – viscoplastic modelling of cunip copper alloy in blanking process
    Mechanics, Materials Science & Engineering (Volume 3, mar 2016, Pages :8 p)
    Touache, Abdelhamid | Thibaud, Sébastien | Chambert, Jérôme | Picart, Philippe
    doi | bibtex

2015 (1)

  • article - Experimental investigation in micro ball-end milling of hardened steel
    Journal of Materials Science and Engineering A (Volume 5, Issue (9-10), dec 2015, Pages :319 - 330)
    Escolle, Bérenger | Fontaine, Michael | Gilbin, Alexandre | Thibaud, Sébastien | Picart, Philippe
    doi | bibtex

2014 (1)

  • inproceedings - Optimization of ball-end cutting bools in micro-machining
    11th International Conference on High Speed Machining (HSM) / Prague, Czech Republic (2014)
    Escolle, Bérenger | Fontaine, Michael | Thibaud, Sébastien | Picart, Philippe
    bibtex

2013 (2)

  • inproceedings - Influence of feed rate in micro-milling studied from experiments and micro-cutting laws identification
    8th International Conference on MicroManufacturing (ICOMM 2013) / Victoria, Canada (2013, Pages pages 1 - 6)
    Gilbin, Alexandre | Fontaine, Michael | Thibaud, Sébastien | Michel, Gérard | Picart, Philippe
    bibtex
  • article - Capability of tungstencarbide micro-mills to machine hardenedtoolsteel
    International Journal of Precision Engineering and Manufacturing (Volume 14, Issue (1), jan 2013, Pages :23 - 28)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Thibaud, Sébastien | Picart, Philippe
    pdf | doi | bibtex

2012 (2)

  • article - Numerical and experimental analyses of punch wear in the blanking of copper alloy thin sheet
    Wear (Volume 296, Issue (S1-2), aug 2012, Pages :598 - 606)
    Falconnet, Edouard | Makich, Hamid | Chambert, Jérôme | Monteil, Guy | Picart, Philippe
    pdf | doi | bibtex
  • inproceedings - Capability of tungsten carbide micro-mills to machine hardened tool steels
    7th International Conference on MicroManufacturing (ICOMM) / Evanston, IL, United States (2012)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Thibaud, Sébastien | Picart, Philippe
    bibtex

2011 (3)

  • inproceedings - Capabilité des micro-fraises en carbure de tungstène à usiner un acier à moule d’injection plastique
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Picart, Philippe | Thibaud, Sébastien
    pdf | bibtex
  • inproceedings - Analyse de sensibilité d'un modèl d'usure de poinçon lors du découpage d'alliages cuivreux
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Falconnet, Edouard | Chambert, Jérôme | Makich, Hamid | Monteil, Guy | Picart, Philippe
    pdf | bibtex
  • inproceedings - Métrologie in situ de l’usure des poinçons dans le découpage des tôles minces
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Makich, Hamid | Cote, Jean-Marc | Monteil, Guy | Picart, Philippe
    pdf | bibtex

publications de Richard Fabrice

2019 (6)

  • inproceedings - Relation between hardness of multilayered (Ti,Al)N based coatings and periods of their stacking
    14th International Conference on Local Mechanical Properties ( 2019) / Prague, Czech Republic (2019, Pages pages 6)
    Zaoui, Mehdi | Bourceret, Alexandre | Gaillard, Yves | Giljean, Sylvain | Rousselot, Christophe | Pac, Marie-Josée | Richard, Fabrice
    pdf | bibtex
  • inproceedings - Identification de modèles de comportement pour le micro-formage de composants miniatures
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 9)
    Thuillet, Stéphanie | Manach, Pierre-Yves | Richard, Fabrice | Thibaud, Sébastien
    bibtex
  • inproceedings - Simulation par méthode asymptotique numérique de la nanoindentation conique dans le cas viscoélastique
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 1)
    Lejeune, Arnaud | Gaillard, Yves | Potier-Ferry, Michel | Richard, Fabrice
    bibtex
  • inproceedings - Conception d’expériences de nanoindentation basée sur l’identifiabilité pour l’extraction de propriétés viscoélastiques
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 12)
    Barick, Mohamed Cheikh | Gaillard, Yves | Lejeune, Arnaud | Amiot, Fabien | Richard, Fabrice
    bibtex
  • inproceedings - Modélisation du lien entre la dureté et la période d’empilement dans un revêtement métal/céramique nano-architecturé en multicouche
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 16)
    Bourceret, Alexandre | Zaoui, Mehdi | Quilliot, Denis | Gaillard, Yves | Giljean, Sylvain | Rousselot, Christophe | Pac, Marie-Josée | Richard, Fabrice
    bibtex
  • inproceedings - New functionalities of Versions 3.1 and 3.2 of TFEL/MFront
    14ème Colloque Nationale en Calcul des Structures (CSMA 2019) / Presqu'île de Giens, France (2019, Pages pages 12)
    Helfer,, Thomas | Fandeur,, Olivier | Geoffroy, Dominique | Toulemonde,, Charles | Hure, Jérémy | Dupuy, Laurent | Forré, Agathe | Deloison, Dominique | Péralès, Frédéric | Lejeune, Arnaud | Thibaud, Sébastien | Richard, Fabrice | Gaillard, Yves | Almanstötter, Jürgen | Gangnant, Alexandre | Draup, Jefry | Kececioglu, Anthony | Garnier, Christophe | Garnier, Christophe | Roland, Jérôme
    bibtex

2018 (5)

  • article - A viscoelastoplastic stiffening model for plant fibre unidirectional reinforced composite behaviour under monotonic and cyclic tensile loading
    Composites Science and Technology (Volume 167, oct 2018, Pages :396 - 403)
    Richard, Fabrice | Poilâne, Christophe | Yang, Haomiao | Gehring, Florian | Renner, Emile
    pdf | doi | bibtex
  • inproceedings - Modélisation de l’indentation de revêtements multicouches Ti0,54Al0,46/Ti0,54Al0,46N
    6ème COLLOQUE INDENTATION (INDENTATION 2018) / Liège, Belgium (2018, Pages pages 2)
    Quilliot, Denis | Giljean, Sylvain | Gaillard, Yves | Pac, Marie-Josée | Richard, Fabrice
    pdf | bibtex
  • inproceedings - Non-uniqueness of the viscoelastic properties determined by sharp nanoindentation. Case of polypropylene
    16th European Mechanics of Materials Conference (EMMC 16) / Nantes, France (2018, Pages pages 2)
    Barick, Mohamed Cheikh | Gaillard, Yves | Lejeune, Arnaud | Richard, Fabrice | Amiot, Fabien
    pdf | bibtex
  • inproceedings - Single crystal plasticity parameters identification from residual imprint topography after nano-indentation
    2018 PhotoMechanics (PM 2018) / Touluse, France (2018, Pages pages 2)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Delobelle, Patrick | Amiot, Fabien
    pdf | bibtex
  • incollection - About Nonlinear Behavior of Unidirectional Plant Fibre Composite
    Advances in Natural Fibre Composites (Edition : Springer International, jan 2018, Pages 69 - 79)
    Poilâne, Christophe | Gehring, Florian | Yang, Haomiao | Richard, Fabrice
    pdf | bibtex

2017 (6)

  • inproceedings - Non-unicité des propriétés viscoélastiques déterminées par nanoindentation conique. Cas du polypropylène
    23ème Congrès Français de Mécanique (CFM 2017) / Lille, France (2017)
    Barick, Mohamed Cheikh | Gaillard, Yves | Lejeune, Arnaud | Richard, Fabrice | Amiot, Fabien
    bibtex
  • inproceedings - Non linear behavior of flax/epoxy unidirectional composite
    3rd International Conference on Natural Fibers (ICNF) / Braga, Portugal (2017)
    Yang, Haomiao | Richard, Fabrice | Gehring, Florian | Poilâne, Christophe
    bibtex
  • inproceedings - Aspect inélastique des composites lin/époxy
    20ème Journées Nationales sur les Composites (JNC 2017) / Champs-sur-Marne, France (2017)
    Gehring, Florian | Yang, Haomiao | Richard, Fabrice | Poilâne, Christophe
    bibtex
  • inproceedings - Numerical prediction of the forming limit diagrams for characterizing the thin sheet formability
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Hapsari, Gemala | Malecot, Pierrick
    bibtex
  • inproceedings - A procedure for ductile damage parameters identification by micro incremental sheet forming
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    bibtex
  • article - Instrumented incremental sheet testing for material behavior extraction under very large strain : information richness of continuous force measurement
    Materials and Design ( 2017)
    Hapsari, Gemala | Richard, Fabrice | Ben Hmida, Ramzi | Malecot, Pierrick | Thibaud, Sébastien
    pdf | doi | bibtex

2016 (5)

  • inproceedings - Sur la caractérisation des interactions entre dislocations dans un cristal CFC de Nickel par analyse de la topographie des empreintes Berkovich
    Colloque Indentation 2016 (2016, Pages pages 2 p)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Amiot, Fabien | Delobelle, Patrick
    pdf | bibtex
  • inproceedings - Non linear behavior of flax/epoxy unidirectional composite
    International Workshop "Dynamic behaviour of green composites" (2016)
    Yang, Haomiao | Richard, Fabrice | Gehring, Florian | Poilâne, Christophe
    pdf | bibtex
  • inproceedings - Numerical determination of the forming limit diagram for thin sheet metal foil from a ductile damage model identified via Micro-Single Point Incremental Forming tests
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016, Pages pages 3 p)
    Ben Hmida, Ramzi | Hapsari, Gemala | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Hardening law identification by micro incremental sheet forming : a sensitivity study
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • article - Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel
    International Journal of Plasticity (Volume 77, feb 2016, Pages :118 - 140)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Amiot, Fabien | Delobelle, Patrick
    pdf | doi | bibtex

2015 (4)

  • inproceedings - MIC2M, un logiciel d’analyse inverse pour l’identification des propriétés mécaniques des matériaux
    Séminaire Informatique Scientifique (2015)
    Richard, Fabrice
    pdf | bibtex
  • inproceedings - On the identifiability of the slip system interaction matrix from residual topography left by nanoindentation in Nickel
    General Meeting on the Mechanics of Nano Objects GDRi CNRS MECANO (2015)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Delobelle, Patrick
    pdf | bibtex
  • inproceedings - On the identifiability of the slip system interaction matrix from residual topography left by nanoindentation in Nickel
    European Solid Mechanics Conference (ESMC9) (2015)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Delobelle, Patrick | Amiot, Fabien
    pdf | bibtex
  • inproceedings - Elastic-plastic damage behavior identification in micro scale length from instrumented micro-single point incremental forming
    International Conference on Micromanufacturing 4M/ICOMM 2015 (2015, Pages pages 230 - 233)
    Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    doi | bibtex

2014 (6)

  • inproceedings - Identifiabilité des paramètres d'une loi élastoplastique endommageable d'une tôle mince : indentation versus formage incrémental
    Identation 2014 (2014)
    Richard, Fabrice | Ben Hmida, Ramzi | Thibaud, Sébastien
    pdf | bibtex
  • inproceedings - Analyse expérimentale et numérique de l'anisotropie et de la plasticité cristalline d'un polycristal de Ni par nano-indentation
    Indentation 2014 (2014)
    Renner, Emile | Gaillard, Yves | Richard, Fabrice | Delobelle, Patrick
    pdf | bibtex
  • article - Microstructural and elasto-plastic material parameters identification by inverse finite elements method of Ti(1-x) AlxN (0 < x < 1 sputtered thin films from Berkovich nano-indentation experiments
    Thin Solid Films (Volume 569, oct 2014, Pages :81 - 92)
    Pac, Marie-Josée | Giljean, Sylvain | Rousselot, Christophe | Richard, Fabrice | Delobelle, Patrick
    pdf | doi | bibtex
  • inproceedings - 3D finite element simulation study of micro single point incremental forming
    International Conference on COmputational methods in Manufacturing Processes (ICOMP'14) (2014)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Anisotropy and crystal plasticity analysis of a FCC nickel polycrystal by nanoindentation and numerical modeling
    14th European Mechanics of Materials Conference (EMMC 14) / Gothenburg, Sweden (2014)
    Renner, Emile | Delobelle, Patrick | Gaillard, Yves | Richard, Fabrice
    bibtex
  • article - Polymer reinforced by flax fibres as a viscoelastoplastic material
    Composite Structures (Volume 112, feb 2014, Pages :100 - 112)
    Poilâne, Christophe | Cherif, Z.E. | Richard, Fabrice | Vivet, A. | Ben Doudou B. | Chen, Jian
    pdf | doi | bibtex

2013 (6)

  • article - Viscoelastic modeling and quantitative experimental characterization of normal and osteoarthritic human articular cartilage using indentation
    Journal of the Mechanical Behavior of Biomedical Materials (Volume 24, aug 2013, Pages :41 - 52)
    Richard, Fabrice | Villars, Mylène | Thibaud, Sébastien
    pdf | doi | bibtex
  • inproceedings - Influence de la taille de grain initiale sur le procédé de formage incrémental des tôles en faibles épaisseurs
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Modélisation numérique de l'endommagement en formage incrémental des tôles en faibles épaisseurs : procédures d'identification et validation
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Anisotropy and crystal plasticity study of fcc polycrystalline Ni by nanoindentation
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Renner, Emile | Delobelle, Patrick | Gaillard, Yves | Richard, Fabrice
    pdf | bibtex
  • article - Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: Experimental investigations
    Materials and Design (Volume 45, mar 2013, Pages :155 - 165)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Gilbin, Alexandre | Richard, Fabrice
    pdf | doi | bibtex
  • inproceedings - Simulation et validation expérimentale de procédé de formage incrémental mono-point des tôles en faibles épaisseurs
    International Congress Design and Modelling of Mechanical Systems (CMSM 2013) (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    bibtex

2012 (1)

  • article - A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation
    Simulation Modelling Practice and Theory (Volume 29, dec 2012, Pages :32 – 43)
    Thibaud, Sébastien | Ben Hmida, Ramzi | Richard, Fabrice | Malecot, Pierrick
    pdf | doi | bibtex

2011 (6)

  • article - Identification of material parameters of cartilage for hip joint mechanical model
    Computer Methods in Biomechanics and Biomedical Engineering (Volume 14, Issue (S1), aug 2011, Pages :249 - 251)
    Villars, Mylène | Fournier, E. | Richard, Fabrice
    pdf | doi | bibtex
  • article - Identification of geometrical parameters of femoral heads for hip joint mechanical model
    Computer Methods in Biomechanics and Biomedical Engineering (Volume 14, Issue (S1), aug 2011, Pages :247 - 248)
    Villars, Mylène | Fournier, E. | Richard, Fabrice | Thibaud, Sébastien
    doi | bibtex
  • inproceedings - Identification of material parameters of cartilage for hip joint mechanical model
    36ème Congrès de la Société de Biomécanique (SB 2011) / Besançon, France (2011)
    Villars, Mylène | Fournier, E. | Richard, Fabrice
    bibtex
  • inproceedings - Identification of geometrical parameters of femoral heads for hip joint mechanical model
    36ème Congrès de la Société de Biomécanique (SB 2011) / Besançon, France (2011)
    Villars, Mylène | Fournier, E. | Richard, Fabrice | Thibaud, Sébastien
    bibtex
  • article - Interprétation du module d’indentation dans le cas des matériaux anisotropes et/ou actifs
    Matériaux & Techniques (Volume 99, Issue (2), jul 2011, Pages :185 - 196)
    Delobelle, Patrick | Dali, S. | Richard, Fabrice
    pdf | doi | bibtex
  • article - Micro-indentation et couplage essais-calculs pour l’identification par méthode inverse du comportement mécanique non linéaire du cartilage fémoral humain
    Matériaux & Techniques (Volume 99, Issue (2), jul 2011, Pages :253 - 259)
    Villars, Mylène | Clément, P. | Mith, S. | Carpentier, Luc | Garbuio, P. | Richard, Fabrice
    pdf | doi | bibtex

2010 (4)

  • inproceedings - Interprétation du module d'indentation dans le cas des matériaux anisotropes et/ou actifs
    Matériaux 2010 (2010)
    Delobelle, Patrick | Richard, Fabrice | Rousselot, Christophe | Dali, S.
    pdf | bibtex
  • inproceedings - Micro-indentation and coupling test-calculations for identification by inverse method of non linear mechanical behaviour of human femoral head cartilage
    Human Biomechanics (2010)
    Clément, P. | Villars, Mylène | Mith, S. | Carpentier, Luc | Garbuio, P. | Richard, Fabrice
    bibtex
  • incollection - Analyse et identification du comportement mécanique du cartilage coxo-fémoral humain à l'aide d'essais d'indentation couplés à une méthode numérique inverse
    Bio reconstruction de l'os à la peau (Editor : Sauramps Medical, Volume Tome 2, 2010)
    Clément, P. | Villars, Mylène | Smith, S. | Carpentier, Luc | Garbuio, P. | Richard, Fabrice
    bibtex
  • unpublished - Analyse inverse d'essais mécaniques ( 2010)
    Richard, Fabrice
    bibtex

2009 (1)

  • inproceedings - Numerical identification of initial stress within in vivo human skin
    / Besançon, France (2009)
    Chihaoui, A. | Chambert, Jérôme | Capek, Lukas | Richard, Fabrice | Dzan, L. | Jacquet, Emmanuelle
    pdf | bibtex

publications de Thibaud Sébastien

2020 (1)

  • article - Influence of manufacturing parameters on the mechanical properties of projection stereolithography-manufactured specimens
    International Journal of Advanced Manufacturing Technology (Volume 106, Issue (5), jan 2020, Pages :265 - 277)
    Ambrosio, Danilo | Gabrion, Xavier | Malecot, Pierrick | Amiot, Fabien | Thibaud, Sébastien
    pdf | doi | bibtex

2019 (2)

  • inproceedings - Identification de modèles de comportement pour le micro-formage de composants miniatures
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 9)
    Thuillet, Stéphanie | Manach, Pierre-Yves | Richard, Fabrice | Thibaud, Sébastien
    bibtex
  • inproceedings - New functionalities of Versions 3.1 and 3.2 of TFEL/MFront
    14ème Colloque Nationale en Calcul des Structures (CSMA 2019) / Presqu'île de Giens, France (2019, Pages pages 12)
    Helfer,, Thomas | Fandeur,, Olivier | Geoffroy, Dominique | Toulemonde,, Charles | Hure, Jérémy | Dupuy, Laurent | Forré, Agathe | Deloison, Dominique | Péralès, Frédéric | Lejeune, Arnaud | Thibaud, Sébastien | Richard, Fabrice | Gaillard, Yves | Almanstötter, Jürgen | Gangnant, Alexandre | Draup, Jefry | Kececioglu, Anthony | Garnier, Christophe | Garnier, Christophe | Roland, Jérôme
    bibtex

2017 (5)

  • article - Effect of a hyper deformation drawing process on mechanical behaviour of thin wires of Ti-26Nb (at.%) alloys
    Materials and Design (apr 2017, Pages pp 273-279)
    Gabrion, Xavier | Thibaud, Sébastien | Zang, Yudong | Charbonnier, Pierre | Laheurte, Pascal | Gaillard, Yves
    doi | bibtex
  • inproceedings - Numerical prediction of the forming limit diagrams for characterizing the thin sheet formability
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Hapsari, Gemala | Malecot, Pierrick
    bibtex
  • inproceedings - A procedure for ductile damage parameters identification by micro incremental sheet forming
    17th International Conference on Sheet Metal (SHEMET 2017) / Palermo, Italy (2017)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    bibtex
  • article - Phenomenological modelling of micro-cutting based on experimental results
    International Journal of Advanced Manufacturing Technology (Volume 88, Issue (9), feb 2017, Pages :3429 - 3436)
    Piquard, Romain | Thibaud, Sébastien | D'Acunto, Alain | Fontaine, Michael | Dudzinski, Daniel
    doi | bibtex
  • article - Instrumented incremental sheet testing for material behavior extraction under very large strain : information richness of continuous force measurement
    Materials and Design ( 2017)
    Hapsari, Gemala | Richard, Fabrice | Ben Hmida, Ramzi | Malecot, Pierrick | Thibaud, Sébastien
    pdf | doi | bibtex

2016 (4)

  • inproceedings - Mechanical characterization of anisotropic materials by Scanning Microdeformation Microscopy
    15th European Mechanics of Materials Conference (EMMC 15) / Brussels, Belgium (2016)
    Maloum, Fatah | Gaillard, Yves | Personeni, Martial | Thibaud, Sébastien | Vairac, Pascal | Amiot, Fabien
    bibtex
  • inproceedings - Hardening law identification by micro incremental sheet forming : a sensitivity study
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016)
    Hapsari, Gemala | Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Numerical determination of the forming limit diagram for thin sheet metal foil from a ductile damage model identified via Micro-Single Point Incremental Forming tests
    12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) / Troyes, France (2016, Pages pages 3 p)
    Ben Hmida, Ramzi | Hapsari, Gemala | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    pdf | bibtex
  • article - Characterization and thermo – elasto – viscoplastic modelling of cunip copper alloy in blanking process
    Mechanics, Materials Science & Engineering (Volume 3, mar 2016, Pages :8 p)
    Touache, Abdelhamid | Thibaud, Sébastien | Chambert, Jérôme | Picart, Philippe
    doi | bibtex

2015 (3)

  • article - Experimental investigation in micro ball-end milling of hardened steel
    Journal of Materials Science and Engineering A (Volume 5, Issue (9-10), dec 2015, Pages :319 - 330)
    Escolle, Bérenger | Fontaine, Michael | Gilbin, Alexandre | Thibaud, Sébastien | Picart, Philippe
    doi | bibtex
  • inproceedings - Force modelling in micro-milling of hardened tool steel
    9th International Conference on MicroManufacturing (4M/ICOMM) / Milano, Italy (2015)
    Piquard, Romain | Gilbin, Alexandre | Fontaine, Michael | Thibaud, Sébastien
    doi | bibtex
  • inproceedings - Elastic-plastic damage behavior identification in micro scale length from instrumented micro-single point incremental forming
    International Conference on Micromanufacturing 4M/ICOMM 2015 (2015, Pages pages 230 - 233)
    Ben Hmida, Ramzi | Richard, Fabrice | Thibaud, Sébastien | Malecot, Pierrick
    doi | bibtex

2014 (6)

  • inproceedings - Identifiabilité des paramètres d'une loi élastoplastique endommageable d'une tôle mince : indentation versus formage incrémental
    Identation 2014 (2014)
    Richard, Fabrice | Ben Hmida, Ramzi | Thibaud, Sébastien
    pdf | bibtex
  • inproceedings - Etude expérimentale du micro-fraisage d'un acier dur à l'aide de µ-fraises destinées à l'usinage de surfaces complexes
    8ème Conférences Machines et Usinage à Grande Vitesse (MUGV 2014) / Saint-Etienne, France (2014)
    Escolle, Bérenger | Fontaine, Michael | Thibaud, Sébastien | Piquard, Romain
    bibtex
  • inproceedings - Expérimentation de la micro-coupe élémentaire sur un acier dur et comparaison au micro-fraisage
    8ème Conférence Machines et Usinage à Grande Vitesse (MUGV 2014) / Saint-Etienne, France (2014)
    Piquard, Romain | Gilbin, Alexandre | D'Acunto, Alain | Fontaine, Michael | Duzinski, D. | Thibaud, Sébastien
    bibtex
  • inproceedings - 3D finite element simulation study of micro single point incremental forming
    International Conference on COmputational methods in Manufacturing Processes (ICOMP'14) (2014)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Study of elementary micro-cutting in hardened tool steel
    11th International Conference on High Speed Machining (HSM) / Prague, Czech Republic (2014)
    Piquard, Romain | Gilbin, Alexandre | Fontaine, Michael | D'Acunto, Alain | Thibaud, Sébastien | Duzinski, D.
    bibtex
  • inproceedings - Optimization of ball-end cutting bools in micro-machining
    11th International Conference on High Speed Machining (HSM) / Prague, Czech Republic (2014)
    Escolle, Bérenger | Fontaine, Michael | Thibaud, Sébastien | Picart, Philippe
    bibtex

2013 (8)

  • article - Viscoelastic modeling and quantitative experimental characterization of normal and osteoarthritic human articular cartilage using indentation
    Journal of the Mechanical Behavior of Biomedical Materials (Volume 24, aug 2013, Pages :41 - 52)
    Richard, Fabrice | Villars, Mylène | Thibaud, Sébastien
    pdf | doi | bibtex
  • inproceedings - Influence de la taille de grain initiale sur le procédé de formage incrémental des tôles en faibles épaisseurs
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Modélisation numérique de l'endommagement en formage incrémental des tôles en faibles épaisseurs : procédures d'identification et validation
    21ème Congrès Français de Mécanique (CFM 2013) / Bordeaux, France (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    pdf | bibtex
  • article - Experimental investigations from conventional to high speed milling on a 304-L stainless steel
    International Journal of Advanced Manufacturing Technology (Volume 69, Issue (9-12), jul 2013, Pages :2191 - 2213)
    Maurel-Pantel, A. | Fontaine, Michael | Michel, Gérard | Thibaud, Sébastien | Gelin, Jean-Claude
    pdf | doi | bibtex
  • article - Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: Experimental investigations
    Materials and Design (Volume 45, mar 2013, Pages :155 - 165)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Gilbin, Alexandre | Richard, Fabrice
    pdf | doi | bibtex
  • inproceedings - Simulation et validation expérimentale de procédé de formage incrémental mono-point des tôles en faibles épaisseurs
    International Congress Design and Modelling of Mechanical Systems (CMSM 2013) (2013, Pages pages 1 - 6)
    Ben Hmida, Ramzi | Thibaud, Sébastien | Richard, Fabrice | Malecot, Pierrick
    bibtex
  • inproceedings - Influence of feed rate in micro-milling studied from experiments and micro-cutting laws identification
    8th International Conference on MicroManufacturing (ICOMM 2013) / Victoria, Canada (2013, Pages pages 1 - 6)
    Gilbin, Alexandre | Fontaine, Michael | Thibaud, Sébastien | Michel, Gérard | Picart, Philippe
    bibtex
  • article - Capability of tungstencarbide micro-mills to machine hardenedtoolsteel
    International Journal of Precision Engineering and Manufacturing (Volume 14, Issue (1), jan 2013, Pages :23 - 28)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Thibaud, Sébastien | Picart, Philippe
    pdf | doi | bibtex

2012 (3)

  • article - A fully parametric toolbox for the simulation of single point incremental sheet forming process: Numerical feasibility and experimental validation
    Simulation Modelling Practice and Theory (Volume 29, dec 2012, Pages :32 – 43)
    Thibaud, Sébastien | Ben Hmida, Ramzi | Richard, Fabrice | Malecot, Pierrick
    pdf | doi | bibtex
  • article - 3D FEM simulations of shoulder milling operations on a 304L stainless steel
    Simulation Modelling Practice and Theory (Volume 22, mar 2012, Pages :13 - 27)
    Maurel-Pantel, A. | Fontaine, Michael | Thibaud, Sébastien | Gelin, Jean-Claude
    pdf | doi | bibtex
  • inproceedings - Capability of tungsten carbide micro-mills to machine hardened tool steels
    7th International Conference on MicroManufacturing (ICOMM) / Evanston, IL, United States (2012)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Thibaud, Sébastien | Picart, Philippe
    bibtex

2011 (5)

  • article - Identification of geometrical parameters of femoral heads for hip joint mechanical model
    Computer Methods in Biomechanics and Biomedical Engineering (Volume 14, Issue (S1), aug 2011, Pages :247 - 248)
    Villars, Mylène | Fournier, E. | Richard, Fabrice | Thibaud, Sébastien
    doi | bibtex
  • inproceedings - Capabilité des micro-fraises en carbure de tungstène à usiner un acier à moule d’injection plastique
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Gilbin, Alexandre | Fontaine, Michael | Michel, Gérard | Picart, Philippe | Thibaud, Sébastien
    pdf | bibtex
  • inproceedings - Développement du procédé de micro hydroformage de tubes
    20ème Congrès Français de Mécanique (CFM 2011) / Besançon, France (2011)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie | Malecot, Pierrick
    pdf | bibtex
  • inproceedings - Identification of geometrical parameters of femoral heads for hip joint mechanical model
    36ème Congrès de la Société de Biomécanique (SB 2011) / Besançon, France (2011)
    Villars, Mylène | Fournier, E. | Richard, Fabrice | Thibaud, Sébastien
    bibtex
  • inproceedings - Formability limits of a SPIFed stainless steel
    14th International ESAFORM Conference on Material Forming (ESAFORM 2011) / Belfast, Ireland (Volume 1353, 2011, Pages pages 229 - 234)
    Radu, C. | Thibaud, Sébastien
    bibtex

2010 (3)

  • inproceedings - Miniaturization of the tube bulging test
    International Conference on Advances in Materials and Processing Technologies (AMPT 2010) (2010, Pages pages 1285 - 1290)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie
    pdf | bibtex
  • inproceedings - Numerical investigations in microhydroforming and design of an experimental set-up for material characterization of micro tubes
    Proceedings of the International Deep Drawing Group Conference (IDDRG-2010), May 31-June 02, 2010, Graz, Austria (2010)
    Lu, Yanxia | Thibaud, Sébastien | Boudeau, Nathalie
    pdf | bibtex
  • article - Experimental investigations and numerical analysis for improving knowledge of incremental sheet forming process for sheet metal parts
    Journal of Materials Processing Technology (Volume 210, Issue (2), jan 2010, Pages :363 - 369)
    Dejardin, Steeve | Thibaud, Sébastien | Gelin, Jean-Claude | Michel, Gérard
    pdf | doi | bibtex

publications de Thuillet Stéphanie

2019 (1)

  • inproceedings - Identification de modèles de comportement pour le micro-formage de composants miniatures
    24ème Congrès Français de Mécanique (CFM 2019) / Brest, France (2019, Pages pages 9)
    Thuillet, Stéphanie | Manach, Pierre-Yves | Richard, Fabrice | Thibaud, Sébastien
    bibtex